Modernize Schneider PL7 programs
See what the old Modicon program controls before you replace it. Altitude traces the original logic and helps you check the result of Schneider’s PL7 conversion.
- Vendor
- Schneider Electric
- Files
- .fef
- 1 Export the PL7 application as .FEF
- 2 Run Schneider’s PL7 converter in Control Expert
- 3 Review the converted logic against the source with Altitude, then build it in Control Expert
Everything a PL7 file holds, in one conversation
Prepare a replacement project from the application export.
- Trace variables and addresses across the original sections
- Review converter warnings alongside the original logic and I/O drawings
- Carry the converted Control Expert project on to Studio 5000, TIA Portal, TwinCAT 3, CODESYS, SEL RTAC, Do-more or Sysmac Studio with the translator
- Check against industrial standards such as IEC 61131-3, ISA-88, ISA-95 and PackML, or your own
Requests engineers type every day
- Which sections drive the transfer pump?
- List the I/O mappings we need for the replacement PLC.
The work PL7 projects need most
Read beside the rest of the line
Studio 5000 Logix Rockwell Automation ControlLogix, CompactLogix and GuardLogix projects, from .L5X and .L5K exports. .L5X.L5K RSLogix 500 Rockwell Automation SLC 500 and MicroLogix ladder, data files and descriptions, from the .SLC export and its .SY6. .SLC.SY6.SY5.EAS RSLogix 5 (PLC-5) Rockwell Automation PLC-5 ladder, data files and documentation, from the .PC5 export and its .CSV. .PC5.CSV.EAS TIA Portal Siemens S7-1200, S7-1500, S7-300 and S7-400 programs, from TIA Portal V14 to V21 exports. SimaticML.scl.awl.db
See Altitude on your PL7 files
We'll walk through the requests that matter to your team on the platforms you run, from review and troubleshooting to documents and migration.