Migrate Siemens STEP 5 programs
Start with the listing an S5 engineer can still produce. Altitude reconstructs the sequence from the blocks and symbols and documents how its I/O and timers map to a modern controller.
- Vendor
- Siemens
- Files
- Text listingPDF program listingSymbol list
- Covers
- SIMATIC S5
- 1 Add a readable STEP 5 listing with available symbols and I/O drawings
- 2 Check the transcribed source and review the conversion decisions
- 3 Compile and test the result on the target platform
Everything a STEP 5 file holds, in one conversation
Work from the available listing and keep each conversion decision with the target program.
- Trace signals and block calls through a STEP 5 listing
- Carry S5 timer behavior into the target and identify timing assumptions
- Produce a conversion report for the engineer commissioning the replacement
- Check against industrial standards such as IEC 61131-3, ISA-88, ISA-95 and PackML, or your own
Requests engineers type every day
- Explain this S5 sequence from its listing.
- Map these S5 timers for a move to TIA Portal.
The work STEP 5 projects need most
Read beside the rest of the line
Studio 5000 Logix Rockwell Automation ControlLogix, CompactLogix and GuardLogix projects, from .L5X and .L5K exports. .L5X.L5K RSLogix 500 Rockwell Automation SLC 500 and MicroLogix ladder, data files and descriptions, from the .SLC export and its .SY6. .SLC.SY6.SY5.EAS RSLogix 5 (PLC-5) Rockwell Automation PLC-5 ladder, data files and documentation, from the .PC5 export and its .CSV. .PC5.CSV.EAS TIA Portal Siemens S7-1200, S7-1500, S7-300 and S7-400 programs, from TIA Portal V14 to V21 exports. SimaticML.scl.awl.db
See Altitude on your STEP 5 files
We'll walk through the requests that matter to your team on the platforms you run, from review and troubleshooting to documents and migration.